AC Charger

(1 customer review)

7kw OCPP EV Charger with Cable 

iPower Smart EV Charger Type 2 with Cable IP65 Electric Vehicle Charging Station EV Wallbox CE Certified 

The iPower AC charger comes in 2 version: Cable and Socket. 

Any non-hardware issues that arise while charging will be resolved immediately.  The housing has a waterproof IP65 grade and a strong IK10 rating. It has stand mounting options in addition to being readily mounted on the wall. 

Applications at home and in small businesses are ideal. 



  • Input voltage/Output voltage – AC 230V 
  • Input frequency – 50/60Hz 
  • Max. output power – 7.4kW (1 Phase) 
  • Max. output current – 32Amp 


To safely balance the energy usage between your electric car chargers and other home appliances to make your car chargers in the most efficient way. 

DLB (Dynamic Load Balancing) is available in the iPower series AC EV Charger for home use, when the EV charger is working with other household appliances at the same time, the DLB box can maintain the dynamic balance of the total household current and ensure the safety of electricity to avoid home overload. 


Monitors the electrical system and in the event of a fault automatically disconnects all poles including the earth conductor. 

If the user uses an EV charger equipped with PEN protection, its internal design has a contactor to cut off the ground, once the PEN line is cut off, the contactor KM1 and KM2 are immediately and automatically disconnected, there is only a weak leakage current between CP and PE to L line, its current value is less than 1mA, which is the smallest perceived leakage current of the human body, people can disengage themselves, no safety risks. 


iPower EV chargers can be controlled by a smart APP via WIFI or Bluetooth connection: 

One-to-one binding EV charger by resetting the password, prevent the EV charger from being stolen; 

View charging data and status; 

Set up various charging configurations, charging current, DLB mode, etc. 

Scheduled charging; 

Firmware update; 


  • RFID card to charge automatically 
  • Type 2 (IEC 62196-2) plug socket without cable 
  • Built-in Type B RCD for Leakage Protection 
  • Over Temperature Sensor 
  • Clip-on Grid Current Sensor 
  • LED Ring Status Indication 
  • With Emergency Stop Switch 



  • Charging capacity- 1.3kW-7.4kW / 4.1kW-22kW 
  • Charge mode- Mode 3 (IEC 61851-1) 
  • Output power- Selectable 1-phase or 3-phase, 230-400V 6 A to 32 A, 50-60 Hz 
  • Connector options- Fixed cable type 2 plug or type 2 Socket 
  • Fixed cable length- 6m (18 ft) 
  • Cable Entry- Rear or bottom

Protection and certification 

  • Build-in RCD- TYPE A + DC6mA leakage sensor built-in 
  • With Cable- IP65, IK10 
  • Socket- IP55, IK10 
  • Housing fire ratings- V0 
  • Operating temperature -25 – +55 
  • Compliance- IEC61851-1, IEC61851-21-2, IEC61000-4, CE EMC EU/2014, CE Low Voltage EU/2014/35 
  • Certificate- CE, CB, RCM 


  • Authorization- Auto-start standard / RFID card option 
  • Status indication- LED ring 
  • Charging protocol- OCPP 1.6J optional 
  • WLAN communication- Wi-Fi / Bluetooth 4.2 option 


  • Housing Polycarbonate 
  • Dimension W169 x H380 x D151 mm 
  • Mounting Wall or Pole 

1 review for AC Charger

  1. iGlobal

    nice product

Add a review

Your email address will not be published. Required fields are marked *

Shopping Cart